Hotel bathroom decoration is the highlight of hotel decoration, it is very important for the hotel to provide consumers with a good comfort, then how to decorate the hotel bathroom, the following small series will tell you the hotel bathroom decoration skills and hotel bathroom decoration precautions .
First, how to decorate the hotel bathroom
We divided the bathroom into two areas: dry area and wet area. Four functions: shower, bathtub, toilet, sink (some hotel rooms and bathrooms also add a dressing table effect). Unless the request satisfies the above effects, the most important thing is to facilitate the application. The dry and wet areas should be scientifically divided, the flow lines in the bathroom should be set smoothly, and the guest application is convenient and safe.
The design of the wet area includes a shower and a bathtub. The shower space is required to be sealed, and the water cannot escape to the outside when the guest is taking a bath. The detailed treatment of the humanized design makes us pay great attention to the shower design in the wet area, such as the ground slip problem; the problem of clear drainage and hidden underground drainage, set small stone orange in a small space of about 1m2, to facilitate the guests to take a bath, bath The size, position and height of the liquid cartridge must also be carefully considered. The basic space required for the guest to move in the shower should be specially calculated. The shower room is designed to stand in line with the design. The bathtub area is designed to take into account the specific request of the guest to lie down, the location of the bath, soap box and hand shower, the length and height of the bathtub handle, and the overflow of the bathtub. The treatment... must be designed in accordance with the request for ergonomics. The installation position of the bathtub's hardware faucet should not impede the guests' actions.
The functions of the dry area include the toilet and the sink. The setting of the sink is supplemented by the small TV set according to the original function. Of course, the magnifying glass, 110V connected socket, hair dryer, etc. are still the places where the designer is working hard. Some of the tricks are the connection between the ceramic washbasin and the countertop, or the undercounter basin, or the above counter basin, or half of the half of the table. Since some daily hand washing products should be placed on the sink, there must be a certain length. The design practice proves that the length should not be less than 1 meter. It is best to separate the toilet seat into a separate small space and set the door for it alone. When the wall of the bathroom is changed to the sliding door, the privacy of the toilet is still good. Add a book folder, phone and SOS to the space of the toilet.
Second, the hotel bathroom decoration matters needing attention
1, the ground. The floor of the bathroom should be waterproof and non-slip. The floor decoration material of the bathroom is preferably made of a non-slip ground with a raised pattern. This floor tile not only has good waterproof performance, but also does not slip too much even in the case of water.
2, the wall: the bathroom wall should also be waterproof, moisture-proof, so generally choose wall tiles, should pay attention to the selection of wall tiles matching the floor tiles, so that the bathroom decoration style is unified.
3, top surface: the top of the bathroom is the most important for moisture and cover. It is best to use a PVC gusset with better waterproof performance as the ceiling. This gusset can be installed on the keel and can also shield the pipeline. It is also possible to use a glass and a translucent sheet to make a ceiling. In addition, you can also use a waterproof coating to brush the top.
4, sanitary ware: sanitary ware and some supporting facilities should be prepared. Sanitary ware mainly includes bathtub or shower room, wash basin, toilet, etc. The supporting facilities include vanity mirror, towel rack, soap pot, bathtub handle and so on. If there is an elderly person or a disabled person in the family, it is best to press three handrails while sitting on the toilet.
5, cabinets: bathroom toiletries, cosmetics in the bathroom is not large, but the number is quite small. It's best to make a small cupboard shelf to place them. However, due to the wetness of the bathroom, the use of wood products should be minimized. If wood products must be used, fireproof boards or materials with high water resistance should also be used.
6, door leaf: the bathroom door should choose waterproof, rust-proof, fire-proof, anti-corrosion materials, it is best not to use wooden doors to prevent deformation in the future. The bathroom should have a threshold to prevent water from overflowing.
7, electrical: the bathroom is relatively humid, so be careful when installing lights, wires. It is best to have a safety device for the switch. The socket is preferably equipped with a waterproof cover. Because the wires of the bathroom should not be exposed, pay attention to the need to reserve sockets and connectors beforehand. Commonly used appliances in the bathroom are water heaters, heaters, ceiling lamps, washing machines, etc. Need to be reminded that if you need to make up in the bathroom, don't forget to set a light on the vanity mirror. It is best to reserve a socket on the side to charge the razor or use the hair dryer.
8. Heating: The general decoration now uses “bathroom†and also uses wall-mounted heaters.
9, the water: the floor of the bathroom should have a drain, and the ground should have a certain slope, so as not to accumulate water. It is best to make a pool of mops and solve the problem of washing the washing machine.
1019 or 1027 Liquid adhesive is recommended for use with our coating systems only. The Liquid adhesive consist of a mixture of butyl rubber and synthetic compound and a solvent-gasoline. The Liquid adhesive is quickly drying applied to the appropriately prepared pipe surface before application of inner layer tape. The function of Liquid adhesive is to provide a bonding medium between the pipe surface and the inner layer tape. It is suitable for hand brush or machine spray application. It can be applied by hand or machine.
Liquid Adhesive Primer P1027,Industrial Adhesive,Adhesive Primer,Adhesive Metal Primer
Jining Qiangke Pipe Anticorrosion Materials CO.,Ltd , http://www.pipe-wrap-tape.com