Bathrooms have always been relatively vulnerable to potential safety problems. When we carefully choose various styles and styles, we should actually pay more attention to the hidden dangers of bathroom safety. We need to be responsible for the safety of ourselves and our families. This is what we must pay attention to. In the later days of life, these hidden dangers may be accumulating, so we must put an end to them.
Cano tile   Carrie bathroom
The advantages and disadvantages of ceramic tiles and bathroom safety
Tiles seem to be more suitable for use in the bathroom than other wall materials. However, the wet environment of the bathroom also makes us pay more attention to the quality and performance of tile products. Chen Peng, Director of Dongpeng Ceramics Products Division, said that consumers must pay attention to the non-slip, strength, water absorption, and the glazed quality of glazed tiles.
1, the bathroom floor tiles should pay special attention to the non-slip. Although the brand will be presented to the consumer when the purchase of relevant data, but it is more appropriate to try to make judgments by personally stepping on it, and conditions can also be sprinkled with water and try again. In addition, the non-slip of the tile is mainly formed by the friction of the contact surface, so it is possible to buy some tiles with a sense of texture and roughness. In addition, if the use of polished tiles must pay attention to whether to add a non-slip agent, you can also feel after the water there is a jerky non-slip effect.
2. The water absorption rate of the wall tile depends on its firmness. In general, the lower the water absorption rate, the higher the density of the product and the stronger the ability to resist pollution. After thermal expansion and contraction of tiles with high water absorption rates, the ceramic tile surface cracks and the overall tile peels off. Clear Beijing, toilets need to pay attention to this issue. Chen Wei pointed out that the simple way to judge is to knock, the sound is crisp and dense, and the sound density is low and the water absorption is high.
3, tile strength determines its resistance to damage. If the strength of the tile is not enough, the entire tile will be easily cracked, and then the product will fall off, scratched, and other dangers. However, Chen Wei said that there is no necessary connection between the strength and thickness of the tiles, and the strength depends essentially on the texture. Therefore, consumers do not necessarily have to buy too much when they buy.
The hardness of sanitaryware determines its load-bearing capacity
Select toilets, basins and other sanitary ware, Chen Wei said that in addition to function and shape, consumers should also pay attention to the product's own firing technology and clean technology.
1. The hardness of sanitaryware determines the load-bearing capacity of the product. This depends on the firing technology of porcelain, there are two kinds of high-temperature porcelain and low-temperature porcelain, only enough temperature can make the material completely porcelain, and fully porcelain porcelain in terms of strength, wear resistance and the density of the glaze It is much better than porcelain that is not completely porcelain. Since most porcelains are glazed on the surface, they do not seem to have much difference. However, the cost of firing high-temperature ceramics is high. Therefore, consumers should consider more from the brand point of view when choosing.
2. The cleaning ability of sanitary ware has a lot to do with the glaze treatment on the surface. It is best to choose those products that are glazing as a whole. The degree of densification of the glaze determines the size of the product's ability to resist fouling. A dense glaze can eliminate bacteria that have accumulated in the pores that are not visible on the surface of the product. In addition, consumers should also pay attention to whether the pipes of sanitary products are glazed or not, and glazed protective pipes are more clean and sanitary.
Bathroom products strong, non-slip, leakage protection should pay attention
Due to the complex function of bathroom products, it is necessary to start from the details when purchasing, considering the level of safety performance.
1. To avoid "Bathroom Syndrome" (hypoxia-ischemia due to high temperature and high humidity). Chen Wei suggested that consumers can purchase a whole bath room with ventilation equipment.
2. Watch out for the shock resistance of tempered glass in the shower room. The overall seismic and impact resistance of tempered glass should be subjected to impact testing at the factory, and it will take one to two months after testing to process the shower room. According to Chen Wei, this is because toughened glass is most easily broken within one month after production when there is no external impact. Some small manufacturers may not be able to do inspections, but the burst of tempered glass is not terrible, but pay attention to the pressure and touch after bursting, so that professionals or manufacturers to solve.
3, pay attention to the product of leakage protection. The places where the bathroom is exposed to power include functional toilets, jacuzzis, and shower rooms where electricity is needed. These places should have leakage protection and overload protection. The products with excellent quality will have such devices to ensure the safety of use.
4. Check the non-skid protection of the bottom part of the bathtub. Under normal circumstances, the bottom of the bathtub has anti-skid protection, increasing friction and improving safety performance. In addition, when the bathtub is in production, good brands will use non-slip acrylic material.
Bathroom Notes Tile Glass Toilet Bathroom Glass Tiles Bathroom Wall Tiles Bathroom Tiles Bathroom Floor Tiles
Hot Tub
Horizon Hot tub spas has got below unique technology in the world:
1. Never bubble on spa acrylic shell :
1) You can test our spa shell on 100 degree hot water more than 200 hours and not any bubble on the spa shell, USA spa shell tested in 80 degree hot water not more than 40 hours only.
2)If the spa acrylic shell bubble happen within warranty term, We will free one new spa for you.
2.Horizon Perfect-core spa control therapy system is designed by our company's oversea designer team, It own many unique technology.
1)Total water-proof spa control panel:
You can drip the spa control panel into the water and not any problem.
2). The Extra-pure water treatment system:
This water treatment system can keep the water clear in the spa more than one year without any chemical chlorine.
3.Luxury polymer spa skirt panel:
1)Don`t fade spa skirt panel used outdoor more than 10 years.
We product our spa spa skirt panel with our unique materials which exploited by our engineer team, So our spa skirt can be used more than 10 years, and the color in the skirt will be not lost.
2)Patent Colorful dream skirt
Hotel Hot tub, 4 persons Hot tub, Family jacuzzi tub,5 persons hot tub, 6 persons spa tub, spa for 4-6 adults, 4-6adults spa tub, party spa tub
Dongguan Horizon Technology Development Co., Ltd. , http://www.bathroomsoffer.com