The output power is large, the load capacity is strong, and the anti-interference ability is strong.
The digital megohm case is made up of high-strength aluminum alloy. The machine is equipped with an equipotential protection ring and a fourth-order active low-pass filter, which can effectively shield the external power frequency and strong electromagnetic field. For capacitive test measurements, since the output short-circuit current is greater than 1.6 mA, it is easy to quickly increase the test voltage to the rated value of the output voltage. For low-resistance measurements, the voltage drop does not affect the test accuracy due to the proportional method design.
The digital megohmmeter does not require human work, is powered by the battery, and the range can be automatically converted. Panel operation and LCD display at a glance make measurement easy and fast.
The digital megohm output short-circuit current can be measured directly without the need for on-board measurements.
Digital megohmmeter terminal symbol Meaning When measuring the insulation resistance, the line "L" is connected with the conductive part of the grounded object and the grounding "E" is connected with the outer casing or ground part of the measured object, shielding "G" and The shielded parts of the measured object are connected or other parts that do not participate in the measurement are connected to eliminate the error caused by the leakage of the meter. When measuring the insulation resistance between components of an electrical product, the "L" and "E" terminations can be placed on either set of wire ends. For example, when measuring the interphase insulation of the generator, the three groups can be exchanged in turn, and a corresponding safety ground is vacated.
Digital megohmmeter measurement steps and methods:
Turn on the power switch “ON/OFFâ€, select the required voltage level, the default is 100V, select the desired voltage position, the corresponding indicator light is on, press the high pressure “start and stop†button, the high voltage indicator lights, the LCD display is stable. Multiplying the value by 10 is the measured insulation resistance value. When the insulation resistance value of the sample exceeds the upper limit of the meter range, the first digit of the display shows “1†and the last three digits are extinguished. When turning off the high voltage, just press the high voltage “start and stop†button again, and press the power “ON/OFF†when turning off the power of the whole machine.
Note: During the measurement, because the sample has absorption and polarization process, the insulation value reading gradually drifts to a large value or has some up and down jumps, which is a normal phenomenon.
Dear Customer:
Thank you for your attention to our products. In addition to this product introduction, the company also has insulation ladder, high voltage insulation pad, cable fault tester, high voltage measuring instrument, insulated boots gloves pressure test device, electric safety tool cabinet, etc. Introduction, if you are interested in our products, please contact us. Thank you!
We are involved in offering high-quality Cnc Plasma Cutting Machine to our valuable customers. These products are made from high-quality components.Our company are prominent manufacturers and exporters of high-quality Auto Duct Forming and Cut to Length Machines. Offered products range consists of Auto Duct Forming Machine, Cut to Length Machine and Roll Former Machine. All offered products are manufactured under the direction of experts using quality tested material and latest technology as per industry norms. Sturdy designs, fine finish, high strength, long service life and damage resistance are features of our offered range of products.
Gantry Double Plasma Cnc Cutting Machine is a stereotyped product carefully developed by our company. It has high processing efficiency and is 2.2 times of single gun cutting. It is a numerical control equipment for metal sheet blanking. It not only has an appearance atmosphere, but also has stable operation, high work efficiency and long service life. It can realize cutting of any metal material according to any pattern. It is widely used in the cutting of sheet metal in various mechanical manufacture industry.
|
Type |
BLDS-3060 |
BLDS-4080 |
BLDS-5080 |
BLDS-60100 |
BLDS-80100 |
|
Input power |
AC380V/50Hz; AC220V/50Hz |
||||
|
Track gauge(mm) |
3000 |
4035 |
5000 |
6000 |
8000 |
|
Effective cutting width(mm) |
2300 |
3300 |
4300 |
5300 |
7300 |
|
Machine width(mm) |
3500 |
4300 |
5500 |
6500 |
8500 |
|
Track length(mm) |
6000 |
8000 |
8000 |
10000 |
10000 |
|
Number of cutting torch(set) |
2 |
2 |
2 |
2 |
2 |
|
Lift(mm) |
200 |
||||
|
Cutting thickness(mm) |
1~30(According to the power supply size) |
||||
|
Cutting speed (mm/min) |
450~5000 |
||||
|
Idle speed(mm/min) |
0~8000 |
||||
|
Drive mode |
Bilateral drive |
||||
|
System |
Shanghai Jiaoda or Beijing Starfire |
||||
|
Operating accurancy |
±0.5mm |
||||
Gantry Double Plasma Cutting Machine
Cnc Plasma Cutting Machine,Cnc Full Mato Cutting Machine,Gantry Double Plasma Cnc Cutting Machine,Double Plasma Cnc Cutting Machine
Shandong Buluoer Intelligent Technology Co., Ltd. , https://www.buluoercuttingmachine.com