Note the installation of electromagnetic pulse valve: 1. After unpacking should first check the manual, the factory certificate, packing list is complete. And then check the list of product names, models are consistent, the control nameplate is consistent with the purchase order. If the defect or does not match, should promptly contact with the manufacturers to find solutions. 2. When the solenoid valve fails, in order to timely isolation and easy maintenance, it is recommended to install bypass (bypass) device. 3. Before installation, please thoroughly purge the air bag and pipeline to avoid foreign matter damage caused by the diaphragm solenoid valve failure. 4. Solenoid valve is the best way to install perpendicular to the horizontal pipe, the coil up. ± 30 ° tilt allowed when conditions do not permit. Otherwise, normal use can not be guaranteed. 5. In hazardous environment to prevent sparks may cause explosion and other accidents, the use of explosion-proof solenoid valve. 6. Solenoid valve body arrow should be consistent with the media flow.
Shengtang Metal Products Co., Ltd. , http://www.pneumatic-wheel-china.com