Splicing large screens Because of its superior working performance and ultra-low use cost, and LCD splicing screens are constantly consolidating the development of digital, intelligent, high-definition in various aspects, and can fully operate information and communication technology means Measurement, analysis, and integration of the key information of the government and the company's operating core systems, so as to respond intelligently to various needs of city life and business activities, and to meet the various needs of the market.
Notes on using LCD splicing screen :
The liquid crystal splicing screen has the stability performance that other display screens can't match, can support 7*24 hours to work uninterruptedly; The liquid crystal splicing screen usually has the long service life in the course of the use and seldom fails frequently, but it causes the breakdown to be general It is because there has been no maintenance for a long time, which will cause the basic aging of its internal components to be serious and will lead to failure. The daily maintenance must not be overlooked during the use of the LCD splicing screen.
The failure of the LCD splicing screen due to a long period of unmaintained maintenance is a relatively irritating problem, and the location of the fault is the main part of the system. If the problem is serious, then its maintenance costs will far exceed the cost of routine maintenance. If it is considered from an economic perspective, it will undoubtedly increase the cost of use. Therefore, in the daily use of LCD splicing screen must develop the following good habits:
Try to avoid pointing your finger at the screen as much as possible. Because the liquid crystal splicing screen is very delicate, and the combat capability is relatively poor, it is very easy to increase the dead pixels. This is exactly why some users find the bad points more and more important reasons for a period of time. This situation is irreversible and remediable. In addition, do not open the back cover of the LCD splicing screen under the condition of electrification. Even after the power is turned off, the voltage of the stored transient is very high. The CFL transformer in the background lighting assembly still has a high voltage of about 1000V.
Keep dry environment. The internal design of the LCD splicing screen is very precise. If the environment is wet, it will easily oxidize and cause short circuit, which will cause huge economic losses to users. Therefore, we must try to keep the LCD splicing screen dry in use. If you find moisture on the surface of the screen, wipe it gently with a soft cloth before you turn on the power. If moisture has entered the LCD panel, the LCD panel must be placed in a well-ventilated or warm place to allow it to evaporate. If the situation is more severe, ordinary users can ask professionals to help solve it. Do not allow the LCD splicing panel to work when no moisture is removed. Otherwise, the liquid crystal electrode will be corroded and the LCD splicing screen will be permanently damaged.
Correctly clean the LCD screen. The LCD splicing screen is used for a long time, and it is easy to have some dust and dirt. Cleaning the LCD splicing screen is inevitable. When cleaning, we must use the correct cleaning method: Use a soft, non-fiber absorbent cotton, lens paper, or soft cloth, etc., to remove a little glass cleaner, and gently wipe off the dust or dirt on the screen.
Our Geotextile includes Pp Needle Punched Nonwoven Geotextile, Pet Needle Punched Nonwoven Geotextile, Pet Continuous Filament Nonwoven Geotextile etc
1. It reinforce old asphalt concrete road surface and asphalt layer, and prevents damage ;
2. It is used for rebuilding cement concrete road surface into composite road surface and restraining reflection caused by block contraction .
3. It is used in road expansion and improvment project and crack caused by old and new combination position and uneven sedimentation ;
4. It is used in soft soil base reinforcement treatment , is favorable for soft soil water separation and concretion,restrains sedimentation effectivly,distributes stress uniformly and improve overall strength of road base;
5. It is sued for preventing contraction crack caused by new road semi-rigid base layer,and reinforces and prevents road surface crack caused by foundation crack reflection.
Nonwoven Geotextile, Pp Needle Punched Nonwoven Geotextile, Pet Needle Punched Nonwoven Geotextile, Pet Continuous Filament Nonwoven Geotextile
Feicheng Lianyi Engineering Plastics Co., Ltd , https://www.lianyigeosynthetics.com