Aluminum diaphragm pump is a new type of conveying machinery, the use of compressed air as the power source, also known as aluminum alloy pneumatic diaphragm pump, for a variety of corrosive liquids, with particles of liquid, high viscosity, volatile, Flammable, highly toxic liquids, can be smoked exhausted. Xiaobian on the aluminum diaphragm and introduce the performance characteristics of what? Aluminum alloy diaphragm pump Aluminum alloy diaphragm pump Features 1, No need to fill the water. Suction up to 5m. Lift up to 50m. Outlet pressure ≥ 6kgf / c㎡; 2, Flowing spacious, through good performance. Allowing the maximum particle diameter up to 10mm . 3, head, flow through the valve opening to achieve stepless regulation (pressure regulation in 1-7 bar); 4, the pump without rotating parts, there is no shaft seal , Diaphragm and other pumping medium and pump moving parts, workpieces completely separated media, the media will not be delivered to the outside leakage. So pumping toxic, easy to play or corrosive media, will not cause environmental pollution and endanger personal safety; 5, do not have electricity, safe and reliable in flammable and explosive places; 6, can be submerged in the media work; Easy to use, reliable work, just open and close the gas valve simply open and close even if due to unexpected long-term non-media operation or sudden shutdown pump will not be damaged.Once overloaded, the pump will automatically shut down, With self-protection performance, when the load back to normal, but also automatically start running; 8, simple structure, less wearing parts, the pump structure is simple, easy installation and maintenance, pump delivery of the medium will not come into contact with the valve, the joint Unlike other types of pump due to the rotor, piston, gear, blades and other parts of the wear and tear and the gradual decline in performance: 9, can deliver a more viscous liquid (viscosity below 10,000 centipoise); 10, The pump without oil lubrication, even idling. Has no effect on the pump, which is the most important feature of the pump. Further Reading: Pumps Valves pipe fittings Exhibition 2016 Exhibition of Information Industry, Internet (Xiamen) Technology Co., Ltd. Author: Asian pumps Network Editor: Yao Xiaoxia (QQ / micro-channel :) (service hotline: 400-6030-811)