| Home>Bearing knowledge>Analysis: Common fault handling and repair methods for hammer crusher |
Analysis: common fault handling and repair methods for hammer crushers
Source: Bearing network time: 2013-08-04
| /*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089'; |
b) Check whether the gap between the hammer head and the purlin can meet the requirements (25 ≤ mm), sand washing machine.
c) View the smooth oil quantity, oil quality and bearing cooling water, and the roller machine [url=] linear screen [/ url].
d) View the tightness and wear of the drive belt and oscillate the feeder.
e) Check whether the shell can leak and wear the high pressure micro-grinding [url=] stone production line [/ url].
View in work a) View motor temperature, bearing temperature, recognize that the crusher and motor rotor bearing temperature does not exceed 75 °C; sand making equipment. Stator winding temperature does not exceed 95 °C, hematite ore dressing equipment [url =] high-strength grinding [/ Url].
b) Check whether the belt can be slack and cracked; hammer crusher. And the oscillation of each part can be normal, high-strength grinding [url=] mobile crushing station [/ url].
c) Check to see if the smooth oil quantity, oil quality and bearing cooling water cooling water of each transmission part can be dredged, and the roller crusher.
d) Investigate broken material size coal crusher [url=] cement production equipment [/ url].
Protection after stop a) Check the wear condition of each working part; oscillate the feeder. Replace if necessary, high pressure mill [url =] circular oscillation screen [/ url].
b) Check whether the hammer joint pin can be dropped, desoldered, and milled.
c) Check for cracking, tortuous deformation or long foreign matter, hematite ore dressing equipment [url=] ç ´ type stone breaking machine [/ url].
d) Check the wear condition; if necessary, the weld cone is broken.
Common fault handling and disposal a) Hammer head, cavity wear (replacement), cement production process [url=] sand making machine [/ url].
b) Belt loosening and cracking (replacement) classifier.
Move the crusher [url=] ç ´ type stone breaker [/ url].
Recommend to friends comments close window
| Bearing related knowledge |
| Listening to the sound and distinguishing the bearing products from the authenticity of the bearing, the quality defects presented after heat treatment, analysis of the new skills and development of the bearing ring grinding super processing (2) Analysis and analysis of the bearing method of the radiator: the development of the bearing industry and the need for numerical control equipment |
This article links to http://
Please indicate China Bearing Network http://
Previous: Positioning of parts on the shaft Next: Bearing terms in English and Chinese -9
This is a 4 burners with cast iron pan suppport . The surface material is stainless steel cast stove .
It is very easy to clear it and tidy for this kind of home kitchen GAS STOVE . we had big supplier for this kind of Stainless Steel Gas Stove . Since we had more than 20 years fo this kind of kitchen Gas Stove . We are the leading manufacturers .hope we can work with each for this kind of it .
Stainless Steel Electric Stove,Gas Stove,Kitchen Gas Stoves,Stainless Steel Gas Stove,this is our main products .welcome to order it .
GAS STOVE
Stainless Steel Electric Stove,Gas Stove,Kitchen Gas Stoves,Stainless Steel Gas Stove
GUANGZHOU AIJINGSI TRADING LIMITED , http://www.aichugashob.com