The ceiling of the kitchen is different from other rooms. The kitchen often uses water, so it will be wet, and the kitchen fumes will be smoked to the ceiling. Although people now use the range hood, there are always some fumes that will run up the air. Therefore, when we choose the ceiling material, we must not only protect against moisture, but also be easy to clean. After considering these issues, we should consider the height of the kitchen ceiling . This is more elaborate. Let's talk about it in detail.
First, how high is the ceiling height of the kitchen
1. According to national standards, the indoor height of the kitchen should be no less than 2.20 meters. Ordinary kitchen ceilings are usually 2.4 to 2.6 meters above the ground. In terms of the height of the house, the floor height is 2.7 meters, the kitchen stays at 2.4 meters, the floor height is 2.8 meters, and the floor height is 2.5 meters. If it is too high, it will not work. The cabinets in the cabinet will have a vacancy on the top surface, which will easily accumulate dust.
2. In terms of ceiling height, most of the families in developed countries are short, and many houses in China are equivalent to other rooms. Therefore, in order to avoid empty and cold, the ceiling height can usually be designed between 2.2 meters and 2.4 meters. It is better not to be lower than 2.3 meters. If it is low, it will feel depressed.
Second, the kitchen ceiling height influencing factors
1, floor height
The height of the floor directly determines the level of the kitchen ceiling. Although it is a height standard of 2.5 meters, if the floor height of the kitchen is 2.5 meters, then local adjustment should be considered in the decoration design of the kitchen ceiling.
2, the size of the kitchen space
If it is a relatively large space, the ceiling setting should not be too high, because the empty and high top of the whole body will form a cold feeling of autumn wind sweeping leaves. If the kitchen area is small, the ceiling setting should not be too short, because In a small space, if the top is pressed, the kitchen will form a restrained sense of restraint.
3, kitchen supplies installation method
The design height standard of the ceiling is affected by the way the kitchen utensils are installed. However, from the visual effect, the height of the ceiling of the kitchen is high and the height is short.
Third, the kitchen ceiling is better
The ceiling of the fir board can be painted with bright varnish with fir strips, which can close the moisture and can be used in the bathroom or kitchen. Relatively speaking, the family is used less, but it is also a feature. Similarly, it is also possible to use a sauna board, a board that is usually waterproofed and treated with anti-corrosion treatment, and the visual effect is similar to that of a fir brush varnish.
The original ceiling of the kitchen is basically between 2.3 and 2.5, but now we also understand, the specific decoration is still depends on the decoration in the home, the use of furniture and the choice of ceiling material, I hope that these contents can bring you help. For more exciting home improvement information, please continue to pay attention to the decoration home network.
More related wonderful reading:
What are the kitchen ceiling materials? Kitchen ceiling considerations
What are the kitchen feng shui? Kitchen ceiling feng shui taboo
How to decorate the kitchen ceiling? Kitchen ceiling decoration renderings
Is it necessary to ceiling the kitchen? Which materials are suitable for kitchen ceilings?
What kind of material is suitable for kitchen ceilings? Kitchen ceiling material
Product Name Alloy Steel Pipe, Standard ASTM A213, A335, A519 ect
Grade ( Material) T5, T9, T11, T12, T22, T23, T91, T92, ASTM A335 P5, P9, P11, P12, P22, 4130 ect, Outside Diameter Ranges 10mm-90mm (DN6-DN80), Wall Thickness Ranges 1mm to 10mm, Length (negotiable) For 20Ft Container 4.8m-5.8m
For 40Ft Container 4.8m-12m, Most common choice Random length(5-7m or 10-12m), Pipe Type Cold Drawn , Seamless.
Pipe End 6-60mm Plain End; 60-127mm Plain End or Beveled End, Our advantages ·Diverse products(Steel pipes, pipe fittings, other fittings).
·Any third party inspection is accepted by we company.
·Quick response in quotation, delivery, after-service.
·Focus on pipe & tube solution for project application.
Minimum Order Quantity 6 meters
Alloy Steel Pipe
Alloy Steel Pipe,A335 P12 Steel Pipe,A335 P22 Steel Pipe,P11 Steel Pipe, SMLS Alloy Steel Pipe, Forged Alloy Steel Pipe, P91 Pipe
Shijiazhuang Bang dong Pipeline Technology Co,Ltd. , https://www.bd-pipefitting.com