After selecting good rubber manufacturers for the dance and buying good rubber for professional dance classrooms, how to install them into a big problem for customers, we can build a dance studio with a small area, and larger ones may need to be installed by professionals. Now. When the rubber is laid in the dance classroom, it is necessary to have a standard on how to qualify. Dance floor network Xiaobian for everyone to sum up a few inspection standards, provide inspection basis for everyone.
The rubber in the dance classroom must be firmly bonded to the ground and there should be no bubbles or tilts.
The edge cut by the wall can not exceed 2mm, the joint must be completely sealed to achieve the effect of no penetration. No unevenness, coking discoloration, spotting, soldering, etc. may occur.
The difference in the interface height of the two kinds of materials cannot be greater than 2mm. If the difference is large, they must be treated with proper beading to protect the edge of the material.
The color of each roll of glue must be the same so as not to affect the overall look and feel.
There must be no obvious defects on the surface of rubber in the dance classroom, such as small holes, chromatic aberration, scratches, etc.
The dust, stains, and glue marks caused during the installation of rubber in dance classrooms must be promptly and completely removed.
After the installation of the dance classroom floor glue, all surplus materials and waste must be removed from the site.
The rubber in the dance classroom must be firmly bonded to the ground and there should be no bubbles or tilts.
The edge cut by the wall can not exceed 2mm, the joint must be completely sealed to achieve the effect of no penetration. No unevenness, coking discoloration, spotting, soldering, etc. may occur.
The difference in the interface height of the two kinds of materials cannot be greater than 2mm. If the difference is large, they must be treated with proper beading to protect the edge of the material.
The color of each roll of glue must be the same so as not to affect the overall look and feel.
There must be no obvious defects on the surface of rubber in the dance classroom, such as small holes, chromatic aberration, scratches, etc.
The dust, stains, and glue marks caused during the installation of rubber in dance classrooms must be promptly and completely removed.
After the installation of the dance classroom floor glue, all surplus materials and waste must be removed from the site.
Quacent sold many houses to Australia to help the builders on site save time. Australian prefab house, Australian SIP House , Australian Wood House, Australian Prefabricated House, Residential House In Australia
：Australian Prefab House, Australian SIP House, Australian Wood House, Australian Prefabricated House, Residential House In Australia
Dalian Quacent New Building Materials Co.,Ltd. , https://www.quacenthomes.com