2002.12 Educational practice and research application of educational technology, one person 85 made spring vibrator and its method like Wei Yun Zhangjiakou Education College cut ditch branch school, Hebei Zhangjia 1076150 bomb, vibrator and its image.
Used, the courseware produced has a small size. The quality is good and the interaction is strong, so it has become the software of choice for the majority of courseware makers. The spring vibrator made by the corpse 5 and its image have the characteristics of intuitive, controllable image and vibration synchronization, which are used to assist the teaching and learning easy to understand spring. The production fills in the spring, selects å© in the 3, ç•Ž state, like 1 defines a shape called a spring, selects the ellipse tool, and drags an ellipse in the work area. Select the fill color inside the ellipse, use the delete button to delete the panel, and the spleen out of the spleen to see the edge of the drawing board. The color is black. Click on the milk 1st; 0 window sees the 4th message, set the comment in the pop-up panel. =100,=40 button, click the paste button, drag the copied ellipse to overlap the original ellipse 1. Single.
Select all the shapes, select the shape again and overlap it with the original shape. Then repeat the above operation, so that there are 8 overlapping ellipse in the working area. 6. Delete the key and erase it like a spring. The pen tool draws small on the right end of the spring, the straight line 3纟 is the 耵 fill label in the required plate, and the ellipse fill color is modified. Click the drop-down menu to select 1; 5; 1. The gradual change of the gradual change of color appears in the color gradient. After clicking the color block under the bar, click the color setting 1. box to the right of the color bar. Drag the mouse to the collapsed color. In the first case, the left 1 is dark red, the right side is black, and then filled with the ink bottle tool, so that the shape looks dark red sphere disturbed, dragging to make the center and work The center of the district + coincides. After the vibrator is created, click on the 8 scene 1 in the upper left corner of the timeline panel to retake the main scene. In this example, all still text is placed on the background layer.
The bamboo raft is renamed to the background. The color is set in the background color of the pop-up window. In this example, it is set to light yellow. Use the character tool to input the spring oscillator and its image. Click the arrow tool in the toolbar and drag the text to the target position to create the bezel. Use the Rectangle Tool to draw a rectangular block without borders, open the information panel and enter the stomach = 2, = grab, point the mountain. The middle of the nine small squares on the left, then input, change. Change the color bar color. Create a cylinder with a sense of rest and feel the 81st frame of the time axis, press 5, 5, that is, extend the background to 81 frames and also 8701.8 yuan attribute, fill in the vibrator in the wide name of the team, select in the 13 state; call 1 Draw an ellipse tool to draw an ellipse in the workspace and delete the border line.
1 Click the timeline panel in the lower left corner to insert the layer tool to add layers. Double click the layer to rename the spring. 2002.12 Educational Practice and Research Educational Technology Application Break into the key frame Click the layer frame, set in the information panel = 150. The rest The item remains unchanged. Click the 31st frame of the layer, set the rating = 350 in the information panel, and the rest of the items will remain unchanged.
In the transition selection, exercise, in the 8.8; beer acceleration and deceleration select 100 with the first frame at the 1 call selection, to select 10 at the 21st frame at the beer selection elbow, beer selection 100 at the 31st frame, 1; selection, heart 1.1.3; å“— choose. 1 A blue background arrowed line segment appears between the keyframes of the spring layer, indicating that the animation is set successfully. Click the spring layer to make all the frames in the layer selected. Click Edit Waste Frame, then click on the middle of the layer in the 41st, click Edit Shipment Frame, make the animation another week, delete the extra frame after 81 frames. Add the layer of the spring animation, double-click to rename the vibrator, mark, vibrate and drag the work, 300,=1504 in the timeline of the layer of the 21st, 31, 31, 41 frames, press the 16th frame, at 6, Input in the information panel, =2,0,=15,'; Click on the 31st frame in the information panel to create the same animation with the spring animation 5.
In order to make the effect better, draw a small circle and mark the letter at the balance position of the vibrator and the maximum displacement on both sides, 0! At this time, the test of the vibrator looks at the current layer of the effect, and establishes the coordinate dish with the straight line of the horizontal and vertical coordinates. , the standard 7 displacement, ordinate time 7, the coordinate system is placed below the vibrator position, and the coordinate origin is aligned with the vibrator's equilibrium position 0 point. From the person below the vibrator, two points are vertically downwards and each drawstring is dotted with the abscissa. Intersect on the ordinate with equal intervals of the pencil tool to draw the scale of every 14 cycles. The rest of the reference lines are drawn with dashed lines. Open the window, the panel, and click the dotted line from the drop-down menu. Then use the straight line tool to draw the mouse 2 vibration image. Create a new layer and name it like Elephant. Use the ellipse tool to draw an ellipse in the work area, delete the fill color and select the elliptical edge line. Use 3, 1, stroke color cooker to modify the edge color. Use the zoom tool in the toolbar to modify the ellipse edge line so that the width is equal to the abscissa axis. The distance between the height and the ordinate axis is 12 cycles. Use the straight tool to divide the ellipse into two symmetrical left and right halves. Select the right half and drag down, and make the upper and left half ends of the right half. Connected and placed in the coordinate system. Delete the image in the drawn dividing line 7, copy the image with the copy and paste command, and complete the phase connection.
In order to synchronize the appearance of the image with the vibrator, it is necessary to use a mask and a mask. The middle of the mask layer needs to be produced one by one. In the middle of the middle, use the rectangle tool to draw a small rectangular block with no border in the work area, and place the beginning part of the vibration image at the origin of the coordinate. The small rectangle with the second borderless frame, then the small rectangle block in front. Covering the vibration of the segment and so on, press at each frame, 6, and then cover the segment vibration with a small rectangular block. Note that the vibration image blocked by each small rectangular block should be synchronized with the action of the vibrator. After all the frames have been created, right click on the layer mask, select elbow as 1 board in the pop-up menu, establish a mask relationship with the image layer, create a new layer, rename it to control, right click at the frame Mouse, select people also 08 interpretation, pop-up 1. Li 6 people, action settings menu sniper + then select the extreme gentleman, the translation of the action scare the cooking animation at the frame stop ten, then the 81st frame Insert keyframes. Similarly, set the curse to the last, hit the single frame action, activate the set frame action script.
In order to achieve object control, two buttons are made. One is for playback and the other is for stop. Create a new layer and draw two rectangular blocks at the appropriate position in the work area. After appropriate modification, select one of them and click 1 if you pay 01. , insert the shot into an element. Zhong 0, he; element attribute menu enter play in the name, select 8 in the 80 state, button, press back to work 41 in the button to point to the button, select 1; like this, pop up 0, 8 action settings menu , click + then select 83., heart 8 this action to scare the play in the menu, the button is set to complete the same method to make the stop button last, click, 0, add 1 can also; call. 8. Control 1 uses the button action. Activate the button; all the animations are finished, press the test, and the effect of fainting
Fiber Cement Siding,Insulated Wall Board,Cement Board Siding,Insulated Exterior Wall Panels
Jiangmen Feifan Industrial Co.,Ltd , https://www.cementboard.net