 |
A study by the Massachusetts Institute of Technology (MIT) showed that American scientists have developed an "artificial blade" that converts sunlight into chemical energy for storage.
The artificial leaf is a solar cell made of cesium, with catalysts on both sides. Put it into a container filled with water, one side will produce oxygen bubbles, the other side will produce hydrogen bubbles, bubbles can be separated and collected.
Daniel Nocera, who heads the study, said that oxygen and hydrogen can be introduced into the fuel cell, and the fuel cell can combine hydrogen into water to generate electricity during the process.
Research papers based on the theme of artificial leaf devices were published in this issue of Science and there are 6 authors. The authors are researchers at Sun Catalytix, a solar company founded by Nocera.
Nochera said that the artificial “blade†is made entirely of rich and inexpensive materials.
One side of the semi-conductive plate is coated with a cobalt-based catalyst that can decompose oxygen, and the other side is coated with nickel-molybdenum-zinc alloy, which can decompose hydrogen.
"You can't find a device that's more portable, lighter, and less wired than it is, and it doesn't require any extra equipment, except to collect and store floating gas." In the statement, Nocera said: "I think this There must be a real opportunity to play in the concept."
However, Nocera pointed out that the device could not be put into commercial production immediately because of the need to develop systems for collecting, storing, and using these gases.
Nocera said: "This is a step and a step in the right direction."
Finger Jointed Board is a good replacement of solid wood ,natural wood without knots and finger jointed .
This Fushi Brand Finger Joint Primed Pine is a perfect product for many uses, especially for furniture . Some of the many uses are fascia, corner boards, trim base molding, furniture parts, shelving, cabinets etc. It is pre-primed for your convenience with two coats of high quality factory applied primer. There are no knots to bleed through your final top coat of paint, making this a great product for painting. It is recommended that you top coat with a high quality latex paint for years of dependability. This Clear Finger Joint Primed Pine can be used for interior and exterior uses, separating it from many other products. It also has better stability than many fake wood products. Also, if you later decide to change the color, it repaints better than most fake wood products.
We Fushi Wood Group produce Finger Joint Board of New Zealand Radiata Pine and Chile Radiata Pine , which is a new substitute material for solid wood to be used for furniture .
Good Quality Pine Finger Joint Board For Table Tops
1. Description of Goods :
1) Size : 1220 * 2440mm , or as requested .
2) Thickness : 12-30mm
3) Glue : E0
4) Usage : furniture , indoor decoration , worktop , tabletop .
5) MC : 8-12%
6) Painting : UV coating or unfinished
7) Sanding : 240 or 320 grit ( face ) , 180 grit ( back )
8) Grades Classified as :-
A-Smooth sanding , no knots , no chromatism , no scar , no split / crack , no wormhole , no sap , no bending , good bright color
B- Little chromatism , Sound/ tight knots not exceeding 5 mm no sap , PKND good bright color .
2. Features & Advantages :
1) natural and good-looking face / back . Uniform color , chemical de-colored , smooth sanding , no wane , no rotten , no split & crack , no glue line . Ends well trimmed .
2) anti-decay , fire resistance and insect prevention .
3. Trade Terms :
1) Packing : Standard exporting packing
2) Delivery time : in 15 days after T / T with 30% deposit or L / C at sight
3) Payment : T / T with 30% deposit or L / C at sight
Finger Joint Board
Finger Joint Laminated Board, Finger Joint Board, Finger Joint Wood,Finger Jointed Board
Fushi Wood Group , http://www.fushiplywood.com