Inspection and quarantine requirements for exporting wood products
Establish a platform for exporting wood products safety limits and quarantine requirements, so that inspection and quarantine personnel and export enterprises can timely grasp the changes in safety requirements and quarantine requirements of each importing country.
Registration. Implement the factory inspector filing system, improve the sense of responsibility and risk awareness of enterprises and factory inspectors, and further strengthen inspection and supervision and quarantine supervision on export products. Because the quality of products produced by registered wood products companies is relatively stable, it is recommended to formulate regional classification management rules for export wood products as soon as possible and implement them. The inspection and quarantine institutions shall implement registration management for exporting wood products and wooden furniture manufacturing enterprises. Products of production enterprises that have not been registered or filed may not be exported.
Raw materials such as wood-based panels, paints, adhesives, preservatives, and dyes used by enterprises must be tested by qualified laboratories. Unqualified inspections must not be used.
Safety and health project control. Enterprises should have basic testing capabilities. For enterprises that do not have all safety and health projects and the ability to detect outbreaks, they should sign an agreement with the laboratories with testing capabilities recognized by the inspection and quarantine, and entrust the safety and health projects to be regularly entrusted to the inspection and quarantine departments. Epidemic detection.
Acceptance of inspections. When accepting the inspection of exported wood products and wooden furniture, the exporting production enterprise shall be required to provide the required registration documents in addition to the Entry-Exit Inspection and Quarantine Inspection and Inspection Provisions, and shall also provide the Registration Certificate for the Export Bamboo and Bamboo Products Manufacturing Enterprises. , "Declaration of Conformity for Exporting Wood Products and Wooden Furniture Manufacturing Enterprises", and key project inspection report form.
Batch inspection of export products. For export manufacturing enterprises of different inspection and supervision categories, according to the risk level of their export products, the batch inspections shall be carried out according to the different proportions of the inspection batches. If a quality inspection certificate is required, a batch inspection shall be carried out. On-site inspection mainly checks the appearance, specifications, quantity, structure, packaging, etc. of the goods, and quarantine according to relevant standards. For the projects involved in the "Technical Regulations and Standards for Projects of Formaldehyde, Heavy Metals, Flame Retardants, etc. of Wood Products and Furniture Products in Countries and Regions", the actual control of the enterprise shall be verified and the verification test shall be carried out irregularly in accordance with the standards of the importing country.
Pay attention to changes in standards and laws and regulations of importing countries' safety and health projects and quarantine projects. Export wood products must meet the requirements of the importing country safety and health projects and quarantine project standards and laws and regulations.
The two export wood products enterprises obtained the qualification certificate for the removal of the wooden packaging decontamination treatment mark
On February 21, 2010, two export wood products enterprises under the jurisdiction of Hulunbeier Inspection and Quarantine Bureau carefully rectified the problems found in on-site audits such as quality management system documents, heat treatment process control, quarantine process management, traceability and label management. After the request, the company will obtain the qualification certificate for the removal of the wooden packaging for the removal of wood packaging. The export products of the two export wood products enterprises are mainly based on integrated materials, and have already passed the registration of the export bamboo and straw products manufacturing enterprises, but due to the export The wooden pallet used in the laminated timber has not been qualified for IPPC identification for a long time, which has restricted and restricted the export of the enterprise. In the first half of 2009, due to the Muto logo, it caused a large amount of inventory of export products. The competent department of Hulunbeier Inspection and Quarantine Bureau timely discovered these problems and timely reflected this situation to the phyto inspecting department and the competent personnel of the Inner Mongolia Inspection and Quarantine Bureau. The phytosanitary office attached great importance to it and dispatched personnel to these enterprises for on-site audit. During the rectification period, consider To the actual problems and difficulties of the enterprise, under the premise of strict management and control, the two export wood products enterprises are allowed to use the exit wood packaging decontamination treatment mark first.
At present, the main products of wood products in the Greater Xing'an Mountains forest area in Inner Mongolia are:
Artificial panels and products: electrical laminated wood, fiberboard, plywood, particleboard, blockboard, veneer, high-density environmentally-friendly laminate flooring, laminates, electrical wood rings, round bars and electrical wood moldings, high-density composites Floor, student seat board, etc.;
Solid wood products: office furniture, civil furniture, hotel furniture, laminated timber, doors and windows, solid wood flooring, drying planed timber, wooden pallets, etc.;
Small wood products: wooden nails, round bars, flagpoles, ice cream slices, food bars, food labels, sanitary chopsticks, oil paint brushes, toothpicks (toothpick quotes, toothpick manufacturers list), birch bark crafts, bark paintings, etc.; Square wood.
In order to revitalize the northeast and protect the green forests of the Greater Xing'an Mountains, the state has devoted a lot of effort to the ecological protection project of the Xing'an Mountains. We are taking the opportunity to bring Hulunbeier's green industry, forestry deep processing industry, environmental protection industry and tourism. Grasp the opportunity of the current national economic structure to face profound adjustment, give full play to the overall resource advantages of the Hulunbeier area, and effectively solve the problems common to the production and export enterprises of Hulunbeier agricultural and forestry products. It is necessary to further strengthen the communication between the procuratorial and inspection enterprises, promote the export of various high-quality specialty products such as agriculture, livestock and forestry, and realize the win-win situation of Hulunbeier's beauty and development.
——Jin Zhao, Vice Mayor of Hulunbeier City
As an import and export inspection and quarantine law enforcement department, it is responsible for supporting and cultivating local products with distinctive characteristics and promoting local economic development. We will adhere to the principle of equal emphasis on customs and services, and conscientiously implement the 12-character policy of “Quality, Safety, Development, and Quality Inspection†of the AQSIQ, and actively respond to the activity of “winning by quality and creating superiorityâ€. At the grassroots level, the investigation listens to the voices of the enterprises, follows up the local development needs, seriously solves the problems that arise, continuously improves the quality and level of services, and promotes the scale development of local specialty products and product transformation and upgrading.
Our best selling of cutting tools include PCD Inserts , PCD End Mill, PCD Ball Nose Mill, PCD Reamer , Carbide Taps , Carbide End Mill , Special Form Cutter and many more.
We provide a variety of carbide inserts, they were widely used to cutting steel, stainless steel, cast iron, heat-resistant alloys, heat-resistant alloys, non-ferrous material and hardened material.
All geomeries are available for your choice, it can be supplied immediately from stock or 2-4 weeks lead time can be given. And we also can produce carbide inserts according to drawings or samples.
Advantage:
Various grade and size are available.
Long use lifetime
and stable performance.
Good quality with competitive price.
PAYMENT AND DELIVERY:
PRODUCT EQUIPMENT :
+
ABOUT US :
We are specialize in manufacturing PCD diamond tools and Carbide tools. Our major product inclulde PCD inserts, PCD Reamers , PCD End Mills, PCD Taps, Cabide Inserts,Carbide Drills, Carbide Reams, Taps etc.,
We also offered customized cutting tools per drawings, and provide package according to customer requirements. We manufacture a series range of cutting tools for machining of Cast iron, Aluminium alloy and Non-Ferros metal, it is widely used in all major sectors like Automobiles, Engineering, Aerospace, Aviation and 3C industry. Premium quality of raw material is used in the production and strict examination during processing with advanced equipment, so our client are satisfied with our reliable quality and on-time delivery.
Our best selling of cutting tools include PCD Inserts, PCD End Mill, PCD Ball Nose Mill, PCD Reamer, Carbide Taps, Carbide End Mill, Special Form Cutter and many more. For these years we have been made a large forward in the technologies of manufacturing cutting tools. With high quality on performance and price, our product sells well both on domestic and overseas market. And we will always focus on the quality and best service, to make long business relationship.
quanlity control:
We have dedicated team of quality control and precise equipment to keep good and stable performance for our products and processing services.
Carbide Inserts,Carbide Cutting Inserts,Carbide Tool Inserts,Carbide Threading Inserts
OPT Cutting Tools Co., Ltd. , http://www.optdiamondtools.com