The shredder is broken and useless. Considering that shredder products are discarded, their main raw materials can be reused. The manufacturer is required to establish a system that centralizes and recycles its products. Design is the beginning stage of the product life cycle. In the design stage, the environment design is injected. By following the “3R†7 principle in the design stage of the product, namely, reduction, reuse, recycling and resource utilization, the three principles. To make the final product environmentally friendly, resource-saving, energy-recyclable, and recyclable.
A. The detachable design of the shredder product must meet several basic conditions, the dismantling workload is minimized, the structure is detachable, the disassembly is easy to operate, and the separation is easy.
B. The shredder product is simple in design. The electric motor drives the belt and the gear to transfer the energy to the tool. The materials and manufacture are relatively simple, including the outer casing, the box, the panel, the motor, the belt, the gear and the circuit board. It should be disassembled using general tools. The components of the electronic and electrical components that are composed of different materials can be separated or connected by an auxiliary separation. Electrical and electronic components and electrical and electronic components in the product should be easy to find and distinguishable. A trained person should be able to disassemble the product independently. Only two or less bearing surfaces should be used for the entire disassembly process. The electronic components must not be attached to the housing except for the operator panel that is attached to the housing.
C. At the beginning of the design of the product, the material that can be recycled is preferred. The recycled plastic refers to the plastic made from waste plastic. The use of recycled plastics helps to conserve resources, further promotes the recycling economy, and produces good environmental benefits. At present, it can meet the requirements of easy disassembly and recyclability.
Company Name: Dongguan City Bonsai Office Equipment Co., Ltd. Shredder manufacturer: http:// http:// http:// http:// http://
Person in charge: Mr. Xiong telephone -89191288
Mobile phone
fax
mailbox:
Q Q: 996114
Address: bonsai shredder bonsai shredder table supplier in Environmental Protection South Road, Weizhou Village, Shatian Town, Dongguan City, Guangdong Province, China. With the concept of serving Yonghe, we will establish a new industry standard with quality. Please contact us for details.
Material :Natural slate , quartz,sandstone ,marble etc .
Size :12''*12'',16''*16"",24''*24'' etc .Can also be made as your requirement
Shape :Rectangle ,square shape etc.
Packing :Hard carton then fumigated strong wooden crate.
The wooden crate size is made as the container size . After loading the wooden crate in the container ,the wooden crates will nearly same size with the width of the container .It can make the wooden crate not have space to move during transport . In this case ,it can keep the stone safety mostly
Application : Can be used to decorate the outside wall or inside wall .Decorate your house ,decorate your life .
Slate Tiles,Slate Floor Tiles,Slate Wall Tiles,Outdoor Slate Tile
HEBEI DFL STONE , http://www.dflstone.com