Waterproof putty features waterproof putty use

Waterproof putty is a kind of seal putty made of butyl rubber, plus additive, a lot of tackifiers and fillers, and made by a certain process. The main purpose of putty powder is to fill the pores of the construction surface and correct the curve deviation of the construction surface, so as to lay a good foundation for obtaining a uniform and smooth paint surface. The following small series introduces waterproof putty features and waterproof putty for everyone.

Waterproof putty features

1, white and creamy, feel good. The surface of the water-resistant putty is smooth and delicate after construction, and the putty after the light-harvesting treatment gives the person a creamy feel. The decorative effect can be used as a decorative layer.

2, good durability, multiple renovations do not have to eradicate. Due to poor water resistance, ordinary putties must be removed and cleaned together with the original paint afterwards. Not only does increasing costs cause waste of resources, renovation costs (material costs, labor costs), and the waste that has been eradicated is difficult to recycle and reuse, causing environmental pollution. Waterproof putty can be used once and for all. After several years of decoration, it can be used for second, third or even more decoration. It is not necessary to bother to shovel the putty layer and polish the surface layer and partially repair it to directly perform the next procedure. This saves time and effort. And protect the wall. Usually high-quality waterproof putty powder can ensure the same life with the wall, greatly prolonging the life of the wall.

3, effectively reduce the amount of paint. The unique whiteness and density of the waterproof putty powder make it possible to save 30 to 40% of the coating amount per unit area of ​​paint adhesion and hiding power than the wall of the ordinary putty powder.

4, high bond strength. The strength of waterproof putty powder is higher than that of common interior wall putty powder, so it is not easy to produce empty drums and peeling when using waterproof putty powder.

5, high unit price but low overall cost. The price of the waterproof putty powder powder is 1-2 times that of the ordinary, but the decorative effect after using the waterproof putty powder is far beyond the ordinary putty powder. In addition, the total cost of the coating and the cost of the putty during the second decoration and the construction cost are calculated using the waterproof putty powder at a low cost.

Waterproof putty how to identify

In the less conspicuous place, get some water on the wall, use your finger to touch the water and put it on the putty. It feels sticky, and putty is sticky to your hand. It is not waterproof putty. On the contrary, it is waterproof putty. In other words, waterproof putty will not fall off by water infiltration. If the wall is not a waterproof putty, it's best to shovel it all over again: After brushing the interface agent, scrape it two or three times to putty.

Waterproof putty use method

1. The ratio of water-proof putty to water is 1:0.4-0.45. Add water first and then add powder. Stir the powder with an electric stirrer for 3-5 minutes to form a no-grain paste. Let stand for 5 minutes and stir once to complete the construction.

2. Batch scratch thickness is controlled within 3mm.

3, putty dry as the temperature and humidity conditions (about 40 degrees) need to water conservation, conservation can be 2-3 days.

4. The moisture content of the base wall is greater than 10%. It is necessary to extend the time for painting the coating or use the anti-alkaline primer for the back cover treatment.

Waterproof putty technical points

1. If you originally brushed lime or paint, now you must brush the latex paint, you must first eradicate the original wall, re-scrape putty

2, if you want to brush the color of the room can buy latex paint directly with color, if you are against, must be finished once, otherwise there is color, of course, the gradual progress of color is also a decorative effect, if you like

3, roller brush quality must be better, hair length moderate, dense and uniform, which affects the stucco effect

4, first brush the ceiling, brush the wall

5, must be the first time and then brush it again (Oh, I have lessons, or wet I brush, the wall down)

6, force evenly

7, light brush 2 times, if you want to rich colors, to brush 3 times before it is even

Editor's summary: The waterproof putty features and the use of waterproof putty are introduced here, and I hope to be helpful to everyone. If you want to know more about yourself, you can follow the information on this site.

Interior wall waterproof putty powder waterproof putty

Yangzhou Chengde have the certification of API 5L and API 5CT, so we permit to produce and sell the API pipes with the Chengde brand directly.

We can produce the API pipes according to the API 5L standard, such as the GR.B Steel Pipe, X42 steel pipe, X52 steel pipe, X65 steel pipe, X70 steel pipe, X80 steel pipe, etc.

The follow table is our main reference list on the API 5L product

 

Customer

PJT name

Grade and size range

Quantity(MT)

Keppel

N/A

X52/X65 PSL2 OD (244.5~457)x(12.7~38.1) mm

3650

Shell

NYHAMNA

X52/GR6/X52 PSL2 OD (219~609)x(12.7~65) mm

968

SBM

SAXI BATUQUE

X52/X65 PSL2 OD (219~660)x(25.4~70) mm

1100

Exxon Mobil

Oil Field Chayvo

X60PSL2/GR.6 OD(273.1~609.6)x(15.09~76.2)

310

Dalian Shipping Building/ZPMC

Leg bracing pipe

X52~X80 PSL2

OD (159~955) x(10~51)mm

7050

PETROBRAS

PMXL1 MEXILHAO

X52/X60/X65 PSL2 OD (219~762)x(18.3~69.85)mm

850

 

The Piercing and rolling technology of Chengde possesses a number of patents in designing and manufacturing the equipment, and has improved in lots of areas targeting better performance and efficiency, which has distinguished itself from the peers. 

Advantages of our pipes

1        Uniform mechanical properties and dimensions in longitudinal& transversal directions and better surface condition

2  Minimum Order Quantity (MOQ) as low as ONE piece AND Huge size scope to accommodate the project requirements (8"~48``).

3  Competitive price and shorter delivery, Superior international standard quality.

4  30 years experience and approvals with Major EPCs/OEMs/Clients in the supplier chain.

API 5L 5CT Certification


API 5L Pipe

Line Pipe,Api 5L Pipe,X52 Pipe,X65 Pipe

YANGZHOU CHENGDE STEEL PIPE CO.,LTD , https://www.chengdepipe.com