| Home>Bearing knowledge>Application and protection of bearings |
Bearing application and protection
| /*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089'; |
Stop the bearing from being subjected to abnormal impact loads,
Regularly check the operation status of the bearing; pay attention to investigate whether the bearing part has abnormal sound and partial sharp temperature rise appearance.
Regularly or quantitatively add lubricating oil or grease as required.
According to the vehicle operating conditions; at least once every six months to completely replace the lubricating oil; and carefully look at the bearings,
View under the condition of bearing protection: Clean the bearing under disassembly with fire oil or gasoline; carefully investigate whether the cylindrical surface of the bearing table has sliding or moving appearance; whether the bearing surface of the bearing has no falling off or pitting; Whether the rolling body and the cage can be worn and deformed; the induction condition according to the bearing view; whether the bearing can be continuously used.
Recommend to friends comments close window
| Bearing related knowledge |
| NTN bearing burnout inspection analysis and avoidance methods The four main reasons for the failure of NTN bearings are the common disadvantages of heat treatment of bearing parts. The reason for the abnormal damage of the bearing code bearing bearing that can not be expressed by the common code can not be expressed. |
This article links to http://
Please indicate China Bearing Network http://
Previous: FAG imported bearing device and application method Next: Selection of longevity bearing
Cam Lock Nuts in furniture and cabinet industry: also known as eccentric connection matrix, is the most commonly used panel furniture and cabinet production connectors accessories, she and connecting rods, embedded parts into a combination of three-in-one connectors, also known as disassembly connectors, because it can disassemble and assemble furniture at any time and anywhere, this connector is very large Convenient transportation of furniture, door-to-door installation, but also vigorously promote the overall furniture and cabinet industry production.
Indicators: The most common is made of zinc alloy by die-casting, its common specifications are 15, is the general specifications of furniture panels, of course, some furniture drawers and other thin plates are used in 12, 10 specifications, and some large-scale public furniture, due to the thickness of the plate, the use of the important demand for height. Due to the lack of domestic furniture hardware standards, there is no general standard in the industry. In terms of the current furniture industry plate specifications, the size of 15 is the most common, the largest use.
Working Principle: As the eccentric wheel bottom deviates from the center of the circle radian, when rotating the eccentric wheel, the connecting rod in the radian will be slowly close to the center of the eccentric wheel bottom along the radian, thus tightening the distance between the two plates, so that the connection is fastened, "eccentric connector" hence the name.
Classification
A) according to its shape, it can be divided into two types: one is the cross slot eccentric wheel, the other is the cross plus six angle eccentric wheel. (Note: This kind of eccentric wheel can be installed with either cross screwdriver, one-word screwdriver or hexagonal wrench.)
B) according to the shape results, it can be divided into two types: one is an eccentric wheel with external teeth, the other is a toothless eccentric wheel. (Note: the characteristic of the eccentric wheel is that the three in one will be fastened after assembly and no retrogression will occur.
According to the shape of the internal clip can be divided into two kinds: one is a ball, with screw round head; the other is arc, with teeth, with screw square head.
Hebei Xinyu Metal Products Co.,Ltd is a ISO9001 cerificated enterprise,which specialize in
manufacturing and exporting Furniture Nuts .Product including
Wing Nuts , Hopper Feed T Nuts , Propeller Nuts , Weld Nuts , Pallet Nuts , Locking Nuts , Rivet Nuts , Doggie Tooth Washers , Steel Stamped Parts , Hopper Feed Rivet T Nuts , Metal Stamped Parts ,
T-Nuts For Cliff-Climbing,Furniture Nuts, Tee Nut For Rock Climbing holding, Insert Tee Nut ,Middle steel Zinc Plated Stamping Wing Nut, Auto Flat Plane Weld Nuts ,
Automobile Spot Welding Nut,Customer-Made Metal Stamping Parts, Cold Heading Tee Nuts ,Stainless Steel Butterfly Nuts, Furniture Eccentric Wheel , Cam Lock Furniture Nut .
Our key strength are custom made special fasteners according to drawing or sample .We have longer and stable business relationship with well-known companies from American, Poland,Germany,French and so on.In the future ,xinyu will continue focusing on innovation special designed products,becoming your most trusted partner.
Cam Lock Furniture Nut
Cam Lock Furniture Nut,Furniture Lock Nut,Cam Lock Nuts,Lock Nuts
Hebei Xinyu Metal Products Co.,Ltd , http://www.t-nuts.net