Many homeowners get really stuck when it comes to designing their bathrooms, especially when choosing a toilet. There are so many factors to consider, and it can be overwhelming. Today, we’ve gathered some expert opinions and tips to help you navigate the process. Here are seven essential steps to help you choose the right toilet for your home.
1. Bowl Size: A larger diameter bowl with a glazed inner surface is ideal. It prevents dirt from sticking and ensures faster, more powerful flushing, reducing the risk of clogs. To test, try placing your hand inside the bowl – if it fits comfortably, that’s usually a good sign.
2. Tank Quality: A leaking toilet tank might not always be obvious, but you can check by adding blue food coloring to the tank. If you see blue water coming out of the bowl after a few minutes, there's a leak. Choose a higher tank for better flushing power. Note that toilets using less than 6 liters per flush are considered water-saving models.
3. Water Flow: The quality of the water flow directly affects the toilet’s performance and lifespan. High-quality toilets have smooth, consistent water flow. A simple way to check is to press the flush button and listen – a crisp, clear sound indicates good performance.
4. Weight: Heavier toilets often mean better quality. A standard toilet weighs around 50 kg, while a high-quality one can weigh up to 100 kg. To test, lift the tank lid – the heavier it feels, the better the build quality.
5. Drainage Outlet: The best toilets have a single outlet at the bottom. Many modern models have 2-3 outlets depending on the pipe size. More outlets mean better flushing power. Make sure to measure the distance from the wall to the center of the drainpipe before purchasing to ensure proper fit. For horizontal drainage, the outlet should match the height of the pipe. For rear or front drainage, specific measurements apply to ensure smooth sewage flow.
6. Glazed Surface: Check the glaze on both the exterior and interior of the toilet. A high-quality glaze should be smooth, even, and free of bubbles or imperfections. Also, feel the inside of the bowl – if it’s rough, it may trap waste and be harder to clean.
7. Flushing Mechanism: There are several types of flushing systems: straight-through, siphonic, whirlpool, and jet. Each has its own advantages. Siphonic and vortex flushing systems are efficient, with siphonic being louder but more powerful, while vortex is quieter. A hybrid model that combines the best of both is often the most practical choice.
Tips:
1. Choose a toilet with moderate water capacity. Too much water can cause splashing, while too little may lead to incomplete flushing.
2. After installation, test the flush by dropping a cigarette butt into the bowl. If it goes down smoothly without making loud noises, the installation is likely correct.
3. Consider the type of sewage system in your home. Older buildings with “Sâ€-shaped pipes may benefit from a direct-flush toilet, while newer homes with straight pipes can use siphonic or vortex models for better odor control and efficiency.
Kep Nuts,Stainless Steel Hex Kep Nuts,Anti Theft Keps Lock Nuts,Stainless Steel K-Lock Nut
Kunshan Liyue Hardware Products Co.,Ltd , https://www.fixlyhardware.com